K-Lath®

K-Lath® is the leader in reinforcement for Stucco Walls and Cladding. Since 1944, K-Lath® has produced welded wire and paper-backed reinforcing products for the stucco industry. Indeed the name "K-Lath®" has become a generic term for describing proper stucco reinforcing. K-Lath® manufactures products in California for shipment across the United States and Canada. K-Lath® Netting has an unique redline furring makes it easy to install.

K-LATH 17 ga Woven Wire
Image(s) Link
https://www.treeisland.com/construction/stucco-reinforcement/woven-wire/k-lath%C2%AE-17-ga-woven-wire Copy

K Lath® 17 ga Woven Wire

Available In: 1-1/2" x 17 ga
Available Coatings: Zinc-coated galvanized wire for superior corrosion protection
Sizes: SF: 36" x 150' (50 sq. yd.) & SFB: 36" x 100' (33 sq. yd.)
Category: Woven Wire
K-LATH 20 ga Woven Wire
Image(s) Link
https://www.treeisland.com/construction/stucco-reinforcement/woven-wire/k-lath%C2%AE-20-gauge-woven-wire Copy

K-LATH® 20 gauge Woven Wire

K-LATH® 1" x 20 gauge woven wire for reinforcement of one-coat modified Portland cement-based plaster.

  • 1" hexagonal opening formed with a reverse twist for superior strength
  • Redline fastening guidelines to ensure quick, easy and correct fastener placement
  • Furred every 6" longitudinally

K-LATH® Kwik Corner accessories make finishing easy.  Check out the accessories area of the website for more details.

Available In: 50 sq. yards
Available Coatings: Galvanized wire for corrosion protection
Sizes: 36" x 150'
Category: Woven Wire
Image(s) Link
https://www.treeisland.com/construction/stucco-reinforcement/corners-and-accessories/k-lath%C2%AE-furring-nails Copy

K-Lath® Furring Nails

K-Lath® furring nails are manufactured for the attachment of non-furred woven wire. Nails are designed with a 1/4" furring device to allow for proper cement embedment.

Available In: 5000 count carton
Available Coatings: Galvanized nail includes 1/4" furring device
Sizes: 1 1/2" or 1 3/4" x 11 gauge 7/16" flat head
Category: Corners and Accessories
Image(s) Link
https://www.treeisland.com/construction/stucco-reinforcement/corners-and-accessories/k-lath%C2%AE-kwik-corner Copy

K-Lath® Kwik Corner

K-Lath® Kwik Corner provides reinforcement of exterior plaster corners to ensure that walls look square and plumb. Use with K-Lath® Woven Wire and Stucco-Rite® welded wire. IAPMO approved.

Available in:

Straight Corner - 90 degree right angle

Short Flange - for use around doors and windows

Bull Nose - for round corners

One Coat - for 3/8" to 1/2" base coat

Kwik Arch - with a flexible leg for easy installation of radius and arch

Kwik Corner - double wire for easy attachment with nails or screws

Kwik Corner Heavy-Duty Class 3 - galvanized for exceptional corrosion protection

Kwik Corner Plastic Nose - PVC coated for high-corrosion environments

 

Available In: 25 & 40 pieces per carton
Available Coatings: Zinc-coated galvanized, Class 3 galvanized, PVC, plastic nose
Sizes: Available in 10' lengths
Category: Corners and Accessories
Image(s) Link
https://www.treeisland.com/construction/stucco-reinforcement/welded-wire/k-lath%C2%AE-stucco-rite-welded-wire-lath Copy

K-LATH® Stucco-Rite Welded Wire Lath

K-LATH® Stucco-Rite is a 16 gauge 2" x 2" welded wire lath for reinforcement of stucco, masonry, and cultured stone. Excellent alternative to 3.4 metal lath.

  • Rigid 1/4" furring for consistent, proper embedment
  • Redline Fastening Guideline on suction paper to ensure quick, easy and correct fastener placement
  • Available with KwikTrack double wire for easy attachment of fasteners
  • Paper backed for quick installation: Grade D, 60 Minute and double paper
  • Stucco-Rite HD - includes stiffening wires for heavier loads and wider stud spacing
  • IAPMO approved
  • Easy installation

 

Available In: 28" x 100"
Available Coatings: Zinc-coated galvanized wire for superior corrosion protection
Sizes: 2" x 2" - 16 ga
Category: Welded Wire
Image(s) Link
https://www.treeisland.com/construction/stucco-reinforcement/welded-wire/k-lath%C2%AE-tile-mesh Copy

K-Lath® Tile Mesh

Tree Island Steel K-Lath® Tile Mesh provides structural reinforcement backing for the installation of tile, stone and brick fascias. Reinforcement for plaster on exterior walls, interior floors, countertops and "wet areas" behind ceramic tile.

Features:

  • 2" x 2" - 16 gauge
  • Galvanized
  • 1/4" or 1/2" furred

Specifications:

  • CTI tested reinforcement for Portland cement mortar.
  • CTI tested for interior floor sound rated systems (see CTI R5113 - 79)
  • Complies with ASTM, C933, C1063, and IBC Federal Specifications QQ - L - 101c
Available In: 1/4" or 1/2" furring
Available Coatings: Galvanized
Sizes: Sheets: 28" x 102" and 38" x 102". Rolls: 48" x 112' and 54" x 100'
Category: Welded Wire